Thanks to our own RFID chip, the 2N® Access Unit 2.0 RFID
reads almost all cards on the market. Quickly, reliably and on both
frequencies – 125 kHz and 13.56 MHz. This comes in handy when you don’t
want to spend money on cards. Give users the option of using one of the
cards they already have in their wallet. Installation will take you only
a few minutes, all you need to do is connect an ethernet cable.
Technical Parameters
Interfaces
Power supply: PoE and/or 12 V/1 A DC
PoE: 802.3af (Class 0–12.95 W)
LAN: 10/100BASE-TX with Auto-MDIX, RJ-45 modular jack
Recommended cabling: Cat-5e or better
Active switch output: 8 to 12 V DC/max 600 mA
Passive switch: NO/NC contacts, up to 30 V/1 A AC/DC
Inputs: 2 inputs – in passive/active mode (-30 V to +30 V DC)
OFF = open or Uin> 1.5 V
ON = short-circuit or Uin< 1.5 V
Tamper switch: native part of the 2N Access Unit 2.0
Audio: buzzer (97dBA)
Supported protocols: DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog
RFID Card Reader
Supported frequencies: 125 kHz variant
13.56 MHz variant
125 kHz and 13.56 MHz variant
125 kHz: EM4100, EM4102, HID Prox
13.56 MHz: ISO14443A, ISO14443B, NFC support
reads UID (CSN)
reads PACs ID (HID iClass cards with SIO object)
Mechanical Properties
Frame: robust zinc cast frame with surface finish (nickel and black color)
Operating temperature: -40°C to +60°C
Storage temperature: -40°C to +70°C
Operating relative humidity: 10%-95% (non-condensing)
Dimensions: Wall (surface) mounting frame:
– 1 module: 107 (W) x 130 (H) x 28 (D) mm
Flush mounting frame:
– 1 module: 130 (W) x 153 (H) x 5 (D) mm
Flush mounting box (minimum hole):
– 1 module: 108 (W) x 131 (H) x 45 (D) mm
Weight: max 0.8 kg
Cover rating: IP54 and IK08