Are you looking for access using something which cannot be forget and which the user always has with them? Select fingerprint access, technology which was the sole domain of bank vaults for a long time. We have already installed the 2N® Access Unit 2.0 Fingerprint Reader in family homes, schools and offices. Try offering this unusual method of access for traditional projects.
Note: External fingerprint reader = 9137423E needed for installation.
Technical Parameters
| Interfaces | |
| Power supply: | PoE and/or 12 V/1 A DC |
| PoE: | 802.3af (Class 0–12.95 W) |
| LAN: | 10/100BASE-TX with Auto-MDIX, RJ-45 modular jack |
| Recommended cabling: | Cat-5e or better |
| Active switch output: | 8 to 12 V DC/max 600 mA |
| Passive switch: | NO/NC contacts, up to 30 V/1 A AC/DC |
| Inputs |
2 inputs – in passive/active mode (-30 V to +30 V DC) OFF = open or Uin> 1.5 V ON = short-circuit or Uin< 1.5 V |
| Tamper switch: | native part of the 2N Access Unit 2.0 |
| Audio: | buzzer (97dBA) |
| Supported protocols: | DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog |
| Fingerprint Reader | |
| Sensor: | optical sensor protected by resistant glass |
| Reliability: | algorithm for fake fingerprint detection |
| Resistance: | resistant to water and dust |
| Signalling: | acoustic and multicoloured LEDs |
| Sensing area: | large with dimensions of 15.24 x 20.32 mm |
| Certification | certified according to FBI standard |
| Mechanical Properties | |
| Frame: | robust zinc cast frame with surface finish (nickel and black color) |
| Operating temperature: | -20°C to +55°C |
| Storage temperature: | Storage temperature: |
| Operating relative humidity: | 10%-95% (non-condensing) |
| Dimension Wall (surface) mounting frame: | – 1 module: 107 (W) x 130 (H) x 28 (D) mm |
| Dimension Flush mounting frame: | – 1 module: 130 (W) x 153 (H) x 5 (D) mm |
| Dimension Flush mounting box (minimum hole): | – 1 module: 108 (W) x 131 (H) x 45 (D) mm |
| Weight: | max 0.8 kg |
| Cover rating: | IP54 and IK08 |
